Assembling the suction tube, vacuum head, and main body
Fig. 4
To complete the vacuum cleaner's installation, once the vacuum head is mounted on the
suction tube, hold the tube vertically and insert it into the main body.
Battery assembly
Fig. 5
To assemble the battery, insert it in the hole in the end of the main body.
-
To remove the battery, press the battery release button and pull outwards to remove it.
-
Note
Remove the battery and store it in a safe, dry place if the appliance is not going to be used in
a long period of time.
Dust tank assembly. Fig. 6
To make the dust tank assembly and disassembly easier, we recommend you separate
-
first the main body from the vacuuming tube.
Hold the dust tank firmly and pull the dust tank release trigger. Then, you will be able to
-
pull the dust tank outwards to separate both parts.
4. OPERATION
You can use this vacuum cleaner in two different manners:
-
Handheld vacuum cleaner, attaching the accessories directly to the main body.
-
Upright vacuum cleaner, using the suction tube with the accessories assembled.
Handheld vacuum cleaner
-
Press the on/off and power switch to turn it on.
-
If you want the power to be fixed, press the fixer.
-
It will automatically operate in Auto mode. The power level can be adjusted at any
moment by pressing the mode selection button.
-
Press the mode selection button to change the modes AUTO, MAX and ECO.
Upright vacuum cleaner
-
Assemble the vacuuming tube and accessories you want to use as indicated in the
assembly section.
-
Press the on/off and power switch to turn it on.
-
If you want the power to be fixed, press the fixer.
-
It will automatically operate in Auto mode. The power level can be adjusted at any
moment by pressing the mode selection button.
Conga Rockstar 6500 Century ErgoWet Animal
ENGLISH
55