kooa HPC2206 Manual Del Usuario página 20

Start-up
Unpacking and checking
1. Remove all parts from the transport packaging
and discard the packaging.
2. Visually inspect the claw grinder and
accessories for possible transport damage. If
any parts are damaged, do not use the unit and
contact customer service (see warranty card).
Charging the battery
Leave the battery in the unit to charge for approx.
5 hours before first use.
1. Switch off the claw grinder if necessary.
2. Connect one end of the supplied USB charging
cable to the USB socket of the claw grinder
(connection is only possible in one position).
3. Connect the other end of the cable to the USB
socket of the USB charger and plug the charger
into the power outlet.
The charge indicator lights up:
−
red = battery is being charged
−
green = battery is fully charged
4. When the battery is fully charged, unplug the
cable from the charger.
20