Steinberg Systems SBS-HPL-30 Manual De Instrucciones página 13

o) Before working with the device, make sure that the heating plate is free from contamination (dirt, dust,
water, etc.). Any contamination should be cleaned.
p) Keep a safe distance between the power cord and the heating plate.
q) WARNING! The internal parameters of the device have been programmed at the factory. It is forbidden
to modify the settings.
ATTENTION! Despite the safe design of the device and its protective features, and despite the use
of additional elements protecting the operator, there is still a slight risk of accident or injury when
using the device. Stay alert and use common sense when using the device.
3. Use guidelines
The product is used to heat samples/mixtures in a cuvette or crucible.
The user is liable for any damage resulting from unintended use of the device.
3.1. Device description
EN
1 – Hot plate
2 - Main ON/OFF switch
3 – Control panel: