Publicidad
Idiomas disponibles
Idiomas disponibles
1
Handle (insulated gripping surface)
2
User Interface
a
Smartphone Indicator
b
ASC Indicator (GST18V-60BC)
c
Power Tool Status Indicator
d
Worklight Indicator
e
Worklight Button
f
Stroke Rate Level Indicator
g
Stroke Rate Preselection Button
3
Battery Pack*
4
Battery Pack Release Button*
5
Extraction Outlet Release Button
6
Footplate
Disconnect battery pack from tool or place the switch in the locked or off posi-
tion before making any assembly, adjustments or changing accessories. Such
preventive safety measures reduce the risk of starting the tool accidentally.
Inserting and Removing
Battery Pack
Use only Bosch or AMPShare
batteries recommended in
the battery/charger list, included with your
tool. Use of any other types of batteries may re-
sult in personal injury or property damage.
Ensure the switch is in the
off position before inserting
battery pack. Inserting the battery pack into
power tools that have the switch on invites ac-
cidents.
(Fig. 1)
To insert the battery pack:
1. Set Switch Lock to the locked position
(GST18V-60C model only).
160992A6Y5 GST18V60CB 202301.indd 10
Getting to Know Your Product
Assembly
-10-
7
Non-Marring Overshoe
8
Saw Blade Guide
9
Saw Blade
10 Shock Protection Guard
11 Blade Clamp
12 Blade Release Lever
13 Worklight
14 On/Off Switch
15 Blade Orbit Selector Lever
16 Chip Blower Switch
17 Saw Blade Guide Adjustment Opening
18 Switch Lock (GST18V-60C)
* Sold separately
Ensure On/Off Switch is set to the off po-
sition prior to inserting the battery pack
(GST18V-60BC model only).
2. Slide charged Battery Pack 3 into the hous-
ing until the battery pack locks into position.
Your tool is equipped with a secondary locking
latch to prevent the battery pack from complete-
ly falling out of the handle, should it become
loose due to vibration.
To remove the battery pack:
1. Press the Battery Pack Release Button 4 and
slide the Battery Pack 3 from the housing.
2. Press the Battery Pack Release Button 4
again and slide the Battery Pack 3 complete-
ly out of tool housing.
1/11/23 3:10 PM
Publicidad
