Publicidad
Idiomas disponibles
Idiomas disponibles
Connectivity functions
System Requirements for Using the App
System Requirements
Mobile device (tablet,
smartphone)
Installing and Setting up the App
You will need to install the device-specific app
before you can use the connectivity functions.
— Download the app from the correspond-
ing app store (Apple App Store, Google Play
Store).
Note: You will need to have a user account
with the relevant app store to do this.
App name
iOS
Bosch Toolbox
— Then select the MyTools or Connectivity sub-
item in the app.
— The display of your mobile device shows you
all of the subsequent steps required to con-
nect the power tool to the mobile device.
160992A6Y5 GST18V60CB 202301.indd 21
Connectivity
Android 5.1 (and newer)
iOS 10 (and newer)
Android
-21-
Data transfer via Bluetooth®
The built-in Bluetooth® Low Energy Module
sends a signal at regular intervals. Depending
on ambient conditions, multiple transmission
intervals may be required before the power tool
is detected. If the power tool is not detected,
check the following:
— Is the distance to the mobile device too great?
Reduce the distance between the mobile de-
vice and the power tool.
— Switch Bluetooth® off and on again on your
mobile device. Check whether the power tool
has now been detected.
Functions in Conjunction with the Power Tool
In conjunction with the Bluetooth® Low Energy
module, the following connectivity functions are
available for the power tool:
— Registration and personalisation
— Status check, output of warning messages
— General information and settings
— Management
— Programming the stroke rate levels
— Switching
on/off
(GST18V-60BC)
— Warning messages (temperature dependent
overload protection, drop control)
and
controlling
ASC
1/11/23 3:10 PM
Publicidad
