Publicidad
Idiomas disponibles
Idiomas disponibles
ALL MAINTENANCE
AND REPAIR
OPERATIONS
NOT LISTED MUST
BE PERFORMED
BY TRAINED
SERVICE TECHNICIAN,
cycmee automaticamBy
when
power
is on, When
servicing,
you
may
be exposed
to voltage
sources,
compressed
air, or moving
parts,
Before
servicing
unit
unplug
or
disconnect
eBectricam
supply
to
the air compressor,
bleed
tank
of pressure,
and allow
the air
compressor
to cool
To Replace
or Clean
Check
Valve
1=
Release all air pressure from air
tank. See "To Drain Tank" in the
Maintenance section.
2.
Set the On/Auto/Off
lever to
"OFF" and unplug unit.
3.
Loosen the nut on the outlet tube
and move the outlet tube to the
side=
4.
5.
Unscrew the check valve (turn
counterclockwise)
using a socket
wrench.
Make sure the valve disc moves
freely inside the check valve
and the spring holds the disc in
the upper, closed position. The
check valve may be cleaned
with a solvent, such as paint and
varnish remover
position
nothing
is
visible.
mnclosed
position
disc is visible,
6.
Apply sealant to the check valve
threads. Reinstall the check valve
(turn clockwise).
7.
Replace the outIet tube and
tighten the nut.
8.
Perform the Break-in Procedure.
See "Break-in Procedure" in the
Operation section.
17-ENG
A14080
Publicidad
