Publicidad
3. Power On the display and press the 1 key (
tinuously hold the "Down" key, to lower the screen to the lowest position until it is
inside the cart slot, as shown below:
4. Insert the Movable Plate from behind, as shown below, and tighten the 4 lock-ups
connecting with the Bottom Plate. Ensure that the clips are engaged.
5. Ensure the display is Powered Off, then unplug the power cord from the power sock-
et. Next, remove the flight plug by rotating it 90° counterclockwise. Finally, place the
power cord into the Backup Box on the Bottom plate.
.
2
16
) on the control box at the base, or con-
3
Publicidad
