Publicidad
Idiomas disponibles
Idiomas disponibles
1 SAFETY INSTRUCTIONS
INSTALLATION
•
Remove all packaging material and transport
bolts before using the appliance. Otherwise,
serious damage may result.
•
This appliance is equipped with a single inlet
valve and can be connected to the cold water
supply only.
•
Mains plug must be accessible after installation.
•
Before washing clothes for the first time, the
product shall be operated once throughout all
the procedures without any clothes inside.
•
Before using the washer dryer, the product
shall be calibrated.
•
Do not put any excessively heavy objects on
the appliance, like water containers or heating
devices.
•
The new hose-sets supplied with the appliance
are to be used and that old hose-sets should
not be reused.
•
Max. Inlet water pressure 1 MPa. Min. inlet water
pressure 0.05 MPa.
ELECTRICAL CONNECTION
•
Make sure the supply cable is not trapped by
the machine, it can get damaged.
•
Connect the product to a grounded outlet
protected by a fuse complying with the values
in the " Technical specifications" table. The
grounding installation has to be made by a
qualified electrician. Ensure that the machine is
installed in accordance with the local
6
Publicidad
