Publicidad
Idiomas disponibles
Idiomas disponibles
Control panel
GB
(Fig.1 on page 3)
1. Speed control
You can control the "browning" evenness of the toasted
bread by adjusting the speed of the conveyor.
1a. Light brown
1b. Medium brown
1c. Dark brown
2. Heating control and ON/OFF Switch
2a. Switch OFF the appliance
2b. Provide low heating power for both upper and lower
heating element. It is also for energy saver when not in
use for some time. But under standby condition for fast
heating when required.
2c. Provide full power to the upper heating element only.
Used for making bagels or buns.
2d. Provide full heating power for both upper and lower
heating element.
3. Power indicator
Preparation before use
• Remove all protective packaging and wrapping.
• Check that the device is in good condition and with all accesso-
ries. In case of incomplete or damaged delivery, please contact
the supplier immediately. In this case, do not use the device.
• Clean the accessories and the appliance before use (See ==>
Cleaning & Maintenance).
• Make sure the appliance is completely dry.
• Place the appliance on a horizontal, stable and heat resistant
surface that is safe against water splashes.
• Keep the packaging if you intend to store your appliance in
the future.
• Keep the user manual for future reference.
NOTE! Due to manufacturing residues, the appliance may emit
a light odor during the first few uses. This is normal and does
not indicate any defect or hazard. Make sure the appliance is
well ventilated.
Installation
• ATTENTION! Any installation, maintenance and repair work
should be performed by qualified and authorized technician
only.
• Always unplug the appliance from the electrical power outlet
and let it cool down completely before installation.
a) Installation of front tray (Fig.2 on page 3)
b) Installation of back tray (Fig.3 on page 4)
Note:
• Do not use the trays for other purposes.
• Do not use the trays for storage and processing of acidic, al-
kaline or salty food.
Operating instructions
• Make sure the heating control knob is switched to the 0 po-
sition.
• Connect the power plug to a suitable electrical power outlet.
• Power ON the appliance by turning the Heating control knob
to the desired setting (Full power/ Low power/Upper heating
only). The power indicator will be light up in green.
• Place the sliced bread on the conveyor by using a tong (not
supplied) to avoid danger of heat burn. Ensure the bread is
evenly placed.
8
• Rotate the Speed control knob to adjust the speed of the con-
veyor & thus the browning evenness of the toasted bread.
• When not in use, set the Heating control knob to the "0" po-
sition.
• Unplug the appliance from the electrical power outlet.
• Allow the appliance to cool down completely before cleaning
or storage.
Note: Due to manufacturing residues, the appliance may emit
a slight odor. This is normal and does not indicate any defect or
hazard. Make sure the appliance is well ventilated.
Cleaning & maintenance
• ATTENTION! Always disconnect the appliance from the pow-
er supply and cool down before storage, cleaning & mainte-
nance.
• Do not use water jet or steam cleaner for cleaning and do not
push the appliance under the water as the parts will get wet
and electric shock might be resulted.
• If the appliance is not kept in a good state of cleanliness, this
can adversely affect the life of the appliance and result in a
dangerous situation.
• Food residues should be regularly cleaned and removed from
the appliance. If the appliance is not cleaned properly, it will
reduce its lifespan and may result in a dangerous condition
during use.
Cleaning
• Clean the cooled exterior surface with a cloth or sponge
slightly dampened with a mild soap solution.
• For reasons of hygiene, the appliance should be cleaned be-
fore and after use.
• Avoid water contacting the electrical components.
• Never immerse the appliance in water or other liquids.
• Never use aggressive cleaning agents, abrasive sponges, or
cleaning agents containing chlorine. Do not use steel wool,
metallic utensils, or any sharp or pointed objects for clean-
ing. Do not use petrol or solvents!
• No parts are dishwasher safe.
Parts
How to clean
All accessories
• Soak in warm, soapy
such as trays, etc.
water for about 10 to
20 minutes.
• Rinse under running
water thoroughly.
Maintenance
• Check the operation of the appliance regularly to prevent se-
rious accidents.
• If you see that the appliance is not working properly or that
there is a problem, stop using it, switch it off and contact the
supplier.
• All maintenance, installation and repair work must be car-
ried out by specialised and authorised technicians, or recom-
mended by the manufacturer.
Remark
Dry all
parts well
at last.
Publicidad
