Fiap profibrand NovaVac 300 Instrucciones De Uso página 14

FISH MARKETING
profibrand
TROUBLESHOOTING
Device cannot be opened
Device cannot seal
Bag can not seal sufficiently
and seal
Device cannot vacuuming
Vacuum pack leaking
14
NovaVac 300
- Please check if the plug is plugged in.
- Please check whether the socket is defective.
- Please check whether the device has been used for
a long time is used continuously. With continuous
Use of the device is a rest period of about
40 seconds required.
Please make sure the red light is on, if you hold the
„Seal" button for 4 seconds press.
- Please make sure whether the placement of the
to be sealed is correct.
- Please make sure whether the bag is folded and
whether the sealing is incomplete.
- If no seal due to proper handling occurs during
vacuuming, then check whether the sealing bar is
damaged or defective.
- Check if the vacuum bag is placed correctly. Is the
vacuum bag folded or uneven placed, it is possible
that no vacuum can arise.
- Check for sharp objects or damaged vacuum bags
are present.
- Fill a maximum of 2/3 of the vacuum bag. Make
sure the suction air intake is not is clogged
and the upper and lower seal are not damaged.
- Polygonal foods need to be sealed and vacuum
packed once.
- Please use special vacuum bags for this.
- Strong-smelling foods may generate gas, which
will cause vacuum failure.
GB