Fired Up Corporation OKO S1 Manual De Instrucciones página 3

IMPORTANT
FITTING THE STOVE PIPE (if applicable)
ONLY COMPATIBLE WITH ADAM STRAIGHT OR ANGLED STOVE PIPES
Parts Supplied
2 x Metal Plates
*Images for illustrative purposes only
1. Assemble the stove pipe insert into an 'X'
and push into the bottom of the stove pipe.
2. Place the stove pipe on top of the stove
and push the stove pipe against the
wall/back panel.
ATTENTION:
within 50mm of the front of the stove to
ensure the vents on top of the stove are
left clear.
DO NOT place anything
≥ 50mm
0 3