Irradio IRDP-65K PRO Manual De Instrucciones página 9

DEEP SOUND HiFi Speakers
Please, read the instructions carefully and keep them for future reference.
Do not use this appliance for purposes other than those described.
Pair of 4 Ohm 120W (60W RMS) Hi-fi speakers from the Irradio Deep Sound professional
line. Hi-fi high quality both in the home and for commercial uses such as: classrooms, shops,
restaurants, conferences and wherever a clear and qualitative sound reproduction is requi-
red.
The components choice and the constructive study together with the finely tuned crossover
return the singing voice with clear and crystalline trebles and a natural and highly resonant
bass.
The 1 "- 25.4 mm silk dome tweeter guarantees clear treble up to 20KHz and the 6.5" - 165
mm Kevlar woofer cone with phase reducer, ensures the quality of reproduction of the
mid-low frequencies with great spatial effect.
The cabinet design is always important for the aesthetics and performance of a Hi-fi speaker,
which is why the Irradio speakers of the Deep Sound Line offer a refined and elegant finish
suitable for multiple contexts, both residential and professional, without sacrificing power and
the definition of sound.
Important requirements for the product safe use
• Before proceeding with the installation of the speakers, read this manual completely and
carefully follow the instructions; also keep it in case of future needs.
• The speakers installation must be carried out by specialized and competent technical
personnel; incorrect installation can result in a drop in performance, in possible damage to
the speakers themselves and the devices connected to them, up to the risk for the safety of
the surrounding people.
• The speakers installation must take place on a flat and stable surface, capable of withstan-
ding a weight at least three times greater.
• If necessary, secure the speakers to the surface with suitable devices, such as double-si-
ded adhesive strips, cords or chains.
• If the product is to be installed suspended, through the use of special supports sold separa-
tely, check the correct installation of the support as well, as well as the use of all safety
devices necessary to prevent injury to third parties in the event of an accidental fall.
• The input signal cable cannot itself be considered a safety device in case of accidental fall,
since the connector does not ensure sufficient restraint.
• The wiring must be connected in a stable manner and it must be ensured that the individual
cables cannot be accidentally disconnected.
• Check that the wiring does not constitute an obstacle or danger for people and / or animals
in the surrounding environment: they must therefore be secured along the corners of floors
and walls, they must not cross floors and must not be passed under carpets and mats,
where they can cause swelling that are difficult to see and therefore dangerous.
• Avoid any installation that exposes the diffusers to direct sunlight, even through glass, or
along the thermal flows of radiators, radiators, stoves and / or fans.
• Carefully check that the output power and impedance data of the amplifier are consistent
with the technical data below: in the event of large differences, the product may suffer
irreversible damage and the safety requirement may be compromised.
• Periodically check the integrity of the speakers: in case of smoke emission, bad smell,
unusual noises or in case of deformation, overheating, structural damage or opening of
IRDP-65K PRO