Publicidad
Idiomas disponibles
Idiomas disponibles
Motion Sensor
Place your hands beneath the motion sensor to activate the flow of water.
The water will automatically turn off when you move your hands away.
Touch Sensor
Tap the sensor to activate the flow of water. Tap again to turn off.
The water will automatically turn off after 3 minutes.
Side Handle
Use the side handle to set the water temperature to your liking.
14
LED Temp.
Display
Touch Sensor
Motion Sensor
Problem
Cause
Faucet does
Power cable
Unplug and re-plug the power cord.
not power on
unplugged
Ensure the connection is secure.
Low battery
Replace with a new battery of the same
brand. Ensure that the positive and negative
terminals of the battery are properly
installed. (Do not mix with old batteries.)
Sensors not
Motion Sensor
Wipe the motion sensor clean.
functioning
Obstructed
Touch sensor failing.
Unplug and re-plug the power cord.
Low water
Water supply
Make sure the water shut-off valve is fully
pressure
obstruction
open and there are no kinked hoses.
Clean the faucet spout.
Water is
Loose connection or
Double check all connections are secure
leaking
missing gasket.
and include a gasket.
Please contact customer support with any questions!
Phone: 847.458.2334
Email: support@biobidet.com
Chat: www.biobidet.com
Solution
15
Publicidad
