Publicidad
Idiomas disponibles
Idiomas disponibles
IND0102
- Do not attempt to move the machine by
tugging on the feeding cable.
- Protect the feeding cable from sources
of heat, steam or corrosive substances.
- Do not drag the feeding cable over
cutting edges, or close it between doors,
drawers, etc. This may cause wear and da-
mage.
- If the feeding cable is damaged, con-
tact an authorized Technical Service Cen-
ter for its replacement.
- We recommend the use of work overalls
and gloves to reduce the risk of injury in
case of accidental contact with the high
pressure jet of steam.
- Do not expose the device to atmospheric
agents (rain, sun, etc.).
- Do not immerge the device under water.
- Do not direct the jet of steam towards the
machine.
- Do not allow the use of the machine by chi-
ldren or the disabled without supervision.
• In case of damage to the machine, do
not put it in operation nor connect it to the
power grid; if already on, turn it off imme-
diately, disconnect electrical feeding and
inform the authorized Technical Service
Center. Repair operations must be carried
out by qualifi ed personnel, and original
spare parts must always be used.
English
3
- DISPOSAL
At the end of its service life the product must
be disposed of in compliance with the cur-
rent regulations concerning the separate wa-
ste disposal and cannot be treated as simple
urban waste.
The product must be disposed of in the de-
dicated waste collection centres or must be
returned to the dealer if replaced with a new
equivalent product.
The symbol
complies with the requirements of the new
directives aimed at the environmental safe-
guard (2012/19/UE) and it must be disposed
of in the appro-priate manner at the end of
its service life.
Ask local authorities for the appropriate wa-
ste disposal areas.
Those who will not dispose of the product ac-
cording to the requirements specifi ed herein
will be liable in compliance with the current
regulations.
29
means that the product
Publicidad
