Klein Tools ET270 Manual De Instrucciones página 12

ENGLISH
When the Low Battery Indicator
batteries must be replaced.
1. Loosen captive screw and
remove battery door.
2. Replace two AAA batteries
(note proper polarity).
3. Replace battery door and
fasten securely with screw.
To avoid risk of electric shock,
disconnect leads from any voltage source
before removing battery door.
To avoid risk of electric shock, do
not operate tester while battery door is
removed.
Be sure tester is turned off and wipe with a clean, dry lint-free
cloth. Do not use abrasive cleaners or solvents.
Remove the batteries when tester is not in use for a prolonged
period of time. Do not expose to high temperatures or humidity.
After a period of storage in extreme conditions exceeding the limits
mentioned in the General Specifications section, allow the tester to
return to normal operating conditions be fore using.
See this product's page at www.kleintools.com
Do not place equipment and its accessories in the trash.
Items must be properly disposed of in accordance with
local regulations. Please see www.epa.gov/recycle for
additional information.
450 Bond Street Lincolnshire, IL 60069
customerservice@kleintools.com
12
BATTERY REPLACEMENT
CLEANING
STORAGE
FCC & IC COMPLIANCE
for FCC compliance information.
Canada ICES-003 (B) / NMB-003 (B)
WARRANTY
www.kleintools.com/warranty
DISPOSAL / RECYCLE
CUSTOMER SERVICE
KLEIN TOOLS, INC.
is displayed on the LCD, the
I
1-800-553-4676
www.kleintools.com