Publicidad
Idiomas disponibles
Idiomas disponibles
Network Settings
Your Web Presenter can connect to the network using a static IP address or by using DHCP.
DHCP - will automatically set an IP address for your unit and connect it to your network without
any settings changed.
The dynamic host configuration protocol, or DHCP, is a service on network servers and routers
that automatically finds your Web Presenter and assigns an IP address. DHCP makes it easy to
connect equipment via Ethernet and make sure that IP addresses do not conflict with each
other. Most computers and network switches support DHCP.
Static IP - If you want to set the IP address yourself, simply set the protocol setting to 'static IP'
and change the IP settings manually.
A static IP address is one that won't change even if your Web Presenter is rebooted.
Using a static IP address might be necessary if your connecting your Web Presenter to a
corporate network. If you have a network administrator, it's possible your network might have
custom IP addresses for all the equipment connected to it. It's best to check with your network
administrator if they are managing your computers and network in your company.
Setting Internet Sharing
for Direct Streaming
If you are unable to plug Web Presenter directly into a network switch or internet router, you can
share your computer's internet connection with Web Presenter through its Ethernet port.
To set up Blackmagic Web Presenter for direct streaming:
1
Set your Web Presenter to use DHCP.
2
Configure your computer to share its internet connection through its Ethernet port.
Mac: in System Preferences, click 'sharing' then select 'internet sharing' from the 'service' list.
In the 'share your connection from' menu, choose 'wi-fi' if your Mac is connected to the internet
over wifi. In the 'to computers using' list, select 'ethernet'. In the 'service' list, tick the 'internet
sharing' checkbox. When you are asked if you are sure you want to turn on internet sharing,
click 'start'.
Windows: right click the 'start' icon and select 'network connections'. The 'network status'
screen appears. Click on 'change adapter options'. This lists your computer's network
connections. Right click on the internet connection and select 'properties'. On the 'sharing' tab,
tick 'allow other network users to connect through this computer's internet connection'. Select a
network connection in the menu then click 'OK'.
3
Plug Web Presenter into your computer's Ethernet port. After a few seconds, DHCP assigns
an IP address to Web Presenter.
4
Confirm your Web Presenter is connected to the internet via Ethernet by observing
Ethernet icon in the top right corner on the unit's LCD screen.
Setting Internet Sharing for Direct Streaming
20
Publicidad
