Publicidad
Idiomas disponibles
Idiomas disponibles
EDGER
SAFETY
WARNING:
Inspect
the area to be
edged
before
each
use.
Remove
objects
(rocks,
broken glass,
nails, wire, etc.) which
can
be thrown
by the blade
or can
wrap
around
the shaft.
• Blade rotates momentarily
after the trigger
is released.
The blade
can seriously
cut
you or others.
• Allow blade to stop before removing
it from
the cut.
Blade rotates
after the
_eger is
ased,
• Throw away blades that are bent, warped,
cracked,
broken
or damaged
in any other
way.
Replace
parts
that
are
cracked,
chipped,
or damaged
before using the unit.
• Do not attempt to remove cut material nor
hold material to be cut when the engine is
running or when cutting blade is moving.
• Always keep the wheel and depth adjusting
skid in contact with the ground.
• Always
push
the
unit
slowly
over
the
ground.
Stay alert for uneven
sidewalks,
holes in the terrain,
large roots, etc.
• Always
use
the
handlebar
when
using
edger attachment.
BLOWER/VACUUM
SAFETY
_I_WARNING:
Inspect
area
before
starting
unit. Remove
all debris and hard ob-
jects such as rocks, glass, wire, etc. that can
ricochet,
be thrown, or otherwise
cause injury
or damage
during operation.
• Do not set unit on any surface except a clean,
hard area while engine is running.
Debris
such as gravel, sand, dust, grass, etc., could
be picked up by the air intake and thrown out
through
discharge
opening, damaging
unit,
property,
or
causing
serious
injury
to
bystanders
or operator.
• Never place objects inside the blower tubes,
vacuum tubes or blower outlet. Always direct
the
blowing
debris
away
from
people,
animals,
glass,
and solid objects
such as
trees, automobiles, wa_ls, etc. The force of air
can cause rocks, dirt, or sticks to be thrown or
to ricochet which can hurt people or animals,
break glass, or cause other damage.
• Never
run
unit
without
the
proper
equipment
attached.
When using your unit
as a blower, always install blower tubes.
• Check air intake opening,
blower
tubes or
vacuum
tubes
frequently,
always
with
engine
stopped
and
spark
plug
disconnected.
Keep vents
and discharge
tubes free of debris which can accumulate
and restrict proper air flow.
• Never place any object in air intake opening
as this could restrict proper air flow and cause
damage to the unit.
• Never use for spreading chemicals, fertilizers,
or other substances
which may contain toxic
materials.
• Toavoidspreadingfire,
donot usenearleafor
brush
fires,
fireplaces,
barbecue
pits,
ashtrays, etc.
BRUSHCUTTER
SAFETY
_k DANGER:
Bladecanthrustviolently
away
from material
it does not cut.
Blade
thrust can cause amputation
of arms or legs.
,_ WARNING:
Donot use trimmerhead
as a fastening
device for the blade.
_'_
,="=WARNING:
The blade continues
to
spin after the throttle
is released
or engine is
turned off. The coasting
blade can throw ob-
jects
or seriously
cut
you
if accidentally
touched.
Stop the blade by contacting
the left
hand side of the coasting
blade with material
already
cut.
bS_a°cPC_ySt
ionr gact
'_. _'_
with cut material.
_
nWARNING:
Inspect
the area to be
cut before each use. Remove
objects (rocks,
broken glass,
nails, wire, etc.) which can be
thrown
or become
entangled
in the blade or
trimmer
line.
• Throw
away
and replace
blades
that are
bent, warped,
cracked,
broken or damaged
in any other way.
• install required shield properly
before using
the unit.
Use the metal shield for all metal
blade
use.
Only
use
brushcutter
attachments
that
provide
a metal
shield
with proboscis
nose.
Publicidad
