ENG
User Manual
Sleep mode cannot be used in dehumidifying fan mode. When the water
tank is full the machine will turn off and sleep mode will be cancelled.
When the air conditioner is powered on for the first time, and then the air
conditioner will enter standby mode.
Protection modes
Frost Protection:
In cooling or dehumidifying modes, if the temperature of the
exhaust pipe is too low, the air conditioner will automatically enter
protection status. When of the exhaust pipe rises to a normal temperature,
it will revert automatically.
Overflow Protection:
When water in the water tank exceeds the warning level, the air
conditioner will automatically sound an alarm, and the "FULL" indicator
light will flash and should empty the water tank. (see more details in
Drainage Instructions)
Automatic Defrosting (only in cooling mode)
The machine has automatic defrosting function.
Protection Function of the Compressor
To increase the service life of the compressor, it has a 3-minute delay
booting protection function after the compressor is turned off.
Installation
Warning: before using the air conditioner, keep it upright for at least two
hours. The air conditioner can be easily moved in the room. In the moving
process, ensure that the air conditioner is in the upright position and it
should be placed on a flat surface. Do not install or use the air conditioner
in the bathroom or other humid environments.
9