GE G188 Manual Del Propietário página 6

About washer features.
The Agitator Cap (on some models)
The agitator cap fits into the top of the
agitator. If it accidentally comes off, simply
put it back on.
OPTIONS
Set when adding
OFF FABRIC SOFTENER
d/or POWER RINSE
Fabric Softener Dispenser
(on some models)
The fabric softener dispenser automatically
releases liquid fabric softener. Setting the
knob ensures that it dispenses at the proper
time.
r3] Add water to dispenser until it reaches
the maximum fill line.
Do not stop the washer or raise the lid
during the first spin. This will cause the
dispenser to empty too soon.
To use, follow these steps:
[-_Make sure dispenser securely
is attached
to agitator.
r21 use only diluted liquid fabric softener.
Pour into dispenser,using amount
recommended on package.
Never pour fabric softener directly on items.
It may stain them.
Do not pour anything into the
agitator if the agitator cap or
dispenser is removed.
[_Select Fabric Softener setting knob to
activate the cycle.
Note: Fabric softener will not dispense if the
knob is in the "OFF"position.
Separate for cleaning
Cleaning the Fabric Softener Dispenser (on some models)
E] Remove the dispenser from the top of the agitator.
r_ Separate the dispenser cup from the cover by grasping the top and pushing down on the
inside of the cup with your fingers. Dispenser cup will pop free from the cover.
r3]To clean the dispenser, soak both the dispenser cup and the dispenser cover in the
following solution:
[] ! USgallon (3.8liters) warm water
[] !/4 cup (60 ml) heavy-duty liquid detergent
[] ! cup (240 ml) bleach
r411f necessary, loosen buildup with a clean, soft cloth after soaking. Do not use a stiff brush;
you may roughen the surface of the dispenser.
r_ Rinseand reassemble dispenser. Placedispenser back on the agitator.
6