Publicidad
Idiomas disponibles
Idiomas disponibles
1. Terry cloth bonnets
can be machined
washed
in cold water, using a small
amount
of detergent.
Then machine
dried at medium
temperature.
HOWEVER,
we recommend
hand washing
and air drying for longer
bonnet
life.
2. Wax applicator
bonnets
should
only be used once, and then disposed
of properly.
3. To prolong the life of the foam pad, ALWAYS
store the buffer/polisher
with
the pad face up.
4. Remove
the bonnet from the foam pad when the buffer/polisher
is not in use,
so the pad can dry out and retain its original
shape.
5. DO NOT USE ABRASIVE
COMPOUNDS
WITH THIS TOOL.
6. DO NOT apply too much wax to the bonnet.
Applying
too much wax causes
the bonnet to become
saturated
and it will not last as long. THIS MAKES
POLISHING
MORE
DIFFICULT
AND IT TAKES
LONGER,
7. If the bonnet
is continually
coming
off the pad, you may be using too much
wax.
8. If buffing seems difficult, you have used too much wax.
9. ONLY USE a mild soap solution and a damp sponge to clean the
buffer / polisher.
10. DO NOT immerse any part of the buffer / polisher in liquid.
Look for these Craftsman
accessories,
they are specially
designed
to make
your 6-in. Buffer/Polisher
more efficient
to use. Accessories
are available
at
your local Sears store or other Craftsman
outlet.
Wax Applicator
Bonnets
For applying waxes and polishes
Terry Cloth Bonnets
Use for removing wax and for buffing and polishing
Polishing Bonnets
For final buffing and polishing to a "showroom shine"
Quality Waxes
For the finest protection and appearance
CAUTION: ALWAYS remove accessories from tool before washing them.
11
Publicidad
