Ultenic H8 Manual Del Usuario página 7

Function & Operation
Instructions For Usage
Note: The position of the water tank mark "MAX" is the maximum filling level.
Place the humidifier on a
1
flat surface and remove
the top cover.
Check and make sure that the rated voltage matches the input
4
voltage, and then plug it into the outlet. The display will show
the " ".
Touch symbol ON/OFF "
5
humidifier will begin to work in AUTO mode. Display shows AUTO symbol "
temperature, current humidity. Hold the power button for about 5 seconds, the "WiFi" symbol on
the display flashes slowly, indicating that the humidifier starts network connection. Following the
instructions and being connected, enjoy quick control by APP !
Pour water into the tank or
2
remove the tank to fill and
then return the tank to the
main base.
", the panel will be lit up as well as the bottom atmosphere light. The
Install the top cover of the
3
water tank.
", and current