Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 2
Once the bed rail is properly placed, check to make sure the guide arm
assemblies are parallel to one another. Then, place the mattress on top
of the assembly.
NOTE: The bed rail mesh wall must fit firmly against the side of the mattress.
This requires you to properly tighten the anchoring straps, which can be
difficult. Please follow the next STEP 3 – 4 carefully for the safest installation.
STEP 3
Release the strap locks and pull
the straps towards you, until the
excess slack has been pulled
out from under the mattress. This
tightens the straps and brings the
bed rail into its proper position.
10
English
Publicidad
