Publicidad
Idiomas disponibles
Idiomas disponibles
HARDWARE CONTENTS
•
I~
C'
>
IEil
E&l
Anchor
A
SAFETY INFORMATION
Qty. 2
Phillips screw
Qty. 2
Transformer
mounting template
Qty. 1
Please read and understand this entire manual before attempting to assemble, operate or install
A
the product.
. . WARNING
• For use with low-voltage landscape lighting systems only.
• Risk of electric shock.
• To reduce the risk of fire or injury, turn off/unplug and allow to cool before replacing bulb.
• Install all luminaires 10ft. or more from a pool, spa or fountain.
• Lamp gets hot quickly. Contact only switch/plug when turning on.
• Lighted lamp is HOT Keep lamp away from materials that may burn.
• DO NOT touch hot lens, guard or enclosure.
• DO NOT operate the luminaire fitting with missing or damaged parts.
• DO NOT repair or tamper with cord or plug.
• DO NOT use extension cords.
• DO NOT submerge the power pack in water.
• DO NOT connect two or more power packs together.
• DO NOT use the power pack with a dimmer switch.
• DO NOT install the power pack within 5 ft. of a pool, spa or fountain.
• DO NOT mount the power pack upon combustible material.
• DO NOT bury the connectors or cables at depths greater than 6 in.
• DO NOT exceed the maximum wattage of the power pack's terminals (200 watts).
• ONLY plug the power pack cord into a covered 120-volt Class A Type GFCI (ground fault
circuit interrupter) receptacle with a hooded flush type cover plate marked "WET LOCATION."
CAUTION
• Always disconnect the power pack from the electrical outlet when working on the lighting system.
• The device is a certified component of a landscape lighting systems in which the suitability of the
combination shall be determined by UL or other inspection authorities having jurisdiction.
CALCULATING LIGHTING CAPACITY
The 200W power pack has a 200-watt circuit.
To determine the maximum number of fixtures that can be safely connected to this power pack,
add the individual wattages of each fixture. The total wattage of your fixtures must not exceed 200
watts.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 30 minutes
Tools required for assembly: Screwdriver, drill bit and drill (not included).
Lowes.com/portfolio
•;[e]~Ui[e]ll
[
e
..-
3
Publicidad
