Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
4. Attach the metal stake (D) to the elbow (B).
5. Unscrew the top cover from the connector (C)
and keep it for later use.
6. Insert wire from low-voltage transformer
into the connector (C) and retighten
the top cover removed in step 5 until the contact
pins completely pierce the plastic shield of the
wire.
CAUTION: The wire used with the connector (C) is
less than 8 in., wire type is SPT-2W 221
oF
18AWG*2C 300V.
5
Lowes.com/portfolio
Publicidad
