Philips SWV9173GR/37 Manual De Usuario

HDMI Switch
Audio/Video
User manual
This 8K 2-port HDMI® Switch allows you to easily toggle between two HDMI devices while
using only one HDMI input port from your display. Please review these instructions before
operating your switch.
Package Contents
8K 2-Port HDMI 2.1 Switch
6 ft. USB-A to USB-C cable
Installation
Three HDMI cables are required to complete installation and are sold separately. While this
HDMI 2.1 switch is compatible with all HDMI cables, it's best to use only certified 8K HDMI
2.1 cables under 10 ft. in total length to get the most out of your connected equipment and
provide the best entertainment experience.
1. Connect the TV's input port to the switch's display port using an HDMI cable.
2. Connect each device's HDMI port to one of the switch's input ports using an HDMI cable.
NOTE: Some setups do not require the USB cable. If the switch
is not operating as expected, use the USB cable to connect the
switch to a power source.
Operation
1. Turn on your TV.
2. Turn on the devices connected to the switch.
3. Press and release the SELECT button on top of the switch to toggle between the two
connected devices. The illuminated LED will indicate which device is selected for use.
Troubleshooting:
Neither LED is illuminated on the switch.
1. Make sure all cables connected to the switch are securely plugged in.
2. If you are using the supplied USB-A to USB-C cable for power, please confirm the following:
a. If the USB adapter is plugged into a surge protector, make sure the surge protector is
turned on and receiving power.
b. If the switch is powered through the TV's USB port, turn on the TV to supply power
to the switch.
I have audio but no video.
1. If connected to a DVD player, make sure you're not using a copied DVD movie.
The enabled HDCP* protection will block copied DVDs from playing.
2. Make sure the HDMI cable is completely plugged into the device and the switch.
3. Make sure the HDMI cable is completely plugged into the switch's display port and the TV's
input port.
4. If problem persists, replace one or both of the HDMI cables used to connect the device,
switch and TV.
I have video but no audio.
1. Make sure the TV's volume is turned up.
2. Make sure the TV's mute function is turned off.
3. If problem persists, replace one or both of the HDMI cables used to connect the device,
switch and TV.
There is no video or audio
1. Some devices need more power than the switch can supply. Use the included USB-A to
USB-C cable to connect the switch to a USB adapter or surge protector (sold separately).
*HDCP: High-bandwidth Digital Content Protection is a technology embraced by the Motion
Picture Association of America that eliminates the reproduction of copyrighted material.
FCC Statement
SWV9173GR/37
v1 05/23
Suppliers Declaration of Conformity
Model #: SWV9173GR/37 | Jasco Products Company LLC |
10 E. Memorial Rd., Oklahoma City, OK 73114 | www.byjasco.com
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
MADE IN VIETNAM
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
and are used under license. This product has been manufactured by and is sold under the
responsibility of Jasco Products Company, and Jasco Products Company LLC, 10 E.
Memorial Rd., Oklahoma City, OK 73114 is the warrantor in relation to this product.
This product has a limited-lifetime warranty. Visit www.philips.com/support
for warranty details.
Questions? Contact our U.S.-based Consumer Care at 1-844-816-0320, M-F,
7AM-8PM Central Time.
For product patent information, visit www.byjasco.com/patents.