Publicidad
Idiomas disponibles
Idiomas disponibles
ge.com
Possible Causes
What To Do
• Placing 2 X 4's (51 mm X 102 mm) under the length of
the freezer will help support it and may reduce vibration.
Noisg operation
Floor may be weak, causing
or cabinet vibrates
freezer to vibrate when
compressor is on.
Cabinet is not positioned
• Adjust legs (on Upright models).SeePreparing to
solidly on floor,
install the freezer.Or use shims for uneven floor.
Freezer is touching the wall.
• Levelfreezer or move slightly. See LevelFreezers.
Freezer temperature
Door/lid left open.
• Check to see if package is holding door/lid open.
tOO warm
Too frequent or too long
door/lid openings.
Temperature control is set
,Turn control to a colder setting. Allow several hours for
too warm.
the temperature to stabilize.
Large amounts of water or hot food • Wait until the freezer has had a chance to reach its
mag have been stored recentlg,
selected temperature.
Freezer has been disconnected
• Freezerrequires 4 hours to cool down completely.
recentlg.
Foods defrosting
Temperature control
• Move the control to a temperature setting.
in OFFposition.
Freezer is unplugged.
• Pushthe plug completely into the outlet.
The fuse is blown/circuit
• Replacefuse or reset the breaker.
breaker is tripped.
Door/lid left open.
• Check to see if package is holding door/lid open.
Too frequent or too long
door/lid openings.
Freezer temperature
Temperature control
• SeeAbout the operation of gout freezer.
too cold
set too cold.
Noisture forms on
Not unusual during
• Wipe surface drg.
outside of cabinet
periods of high humiditg.
Door mall not be seating properlll,
• See Preparing to install the freezer.
causing cold air from inside the
freezer to meet warm moist air
from the outside.
Interior light does
No power at outlet.
• Replacefuse or reset the breaker.
not work
Freezer is unplugged.
• Pushthe plug completely into the outlet.
(onsome models)
Light bulb burned out.
• Replacebulb.
Door/lid won't fullg
Legs need adjusting.
• See Preparing to install the freezer.
close bg itseff
Packageholdingdoor/lid open.
Slowstarting time
Built-in overload protection.
after being off
Excessivefrost
Door/lid left open.
• Check to see if package is holding door/lid open.
buildup
Too frequent or too long
door/lid openings.
Not unusual during
periods of high humiditll.
15
Publicidad
