Descargar Imprimir esta página

Craftsman 917.28638 Manual De Instrucciones página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

Slope
Sheet
Keys
(1) Oil Drain Tube
For Future Use
(2) Keys
Your new tractor has been assembled at the factory with the exception of those parts left
unassembled for shipping purposes.
When
right or left hand
is mentioned
in
this manual,
it means,
from your point of
view, when you are in the operating
posi-
tion (seated
behind
the steering
wheel).
TO
REMOVE
TRACTOR
FROM
CARTON
UNPACK
CARTON
1. Cut along
dashed
lines on all four pan-
els of carton.
Remove
end panels
and
lay side panels
flat.
2.
Remove
protective
materials
from trac-
tor hood and grille.
iMPORTANT:
Check for and remove
any
staples
in skid that may puncture
tires
where
tractor
is to roll off skid.
CHECK
BATTERY
1.
Lift hood to raised position.
NOTE:
If this battery
is put into service
after month
and year
indicated
on label
(L) (label is located
between
terminals)
charge
battery
for minimum
of one hour at
6-10 amps.
(See "BATTERY"
in Mainte-
nance
section
of this manual
for charging
instructions).
ADJUST
SEAT
1. Sit in seat.
2.
Lift up adjustment
lever (A) and slide
seat until a comfortable
position
is
reached
which allows
you to press
clutch/brake
pedal all the way down.
3.
Release
lever to lock seat in position.
NOTE: You may now roll or drive your
tractor off the skid. Follow the appropriate
instruction below to remove the tractor
from the skid.
WARNING: Before starting, read, un-
derstand and follow all instructions in the
Operation section of this manual. Be sure
tractor is in a well-ventilated
area. Be sure
the area in front of tractor is clear of other
people and objects.
TO ROLL TRACTOR
OFF SKID
(See
Operation
section
for location
and
function
of controls)
1. Raise attachment
lift lever to its highest
position.
2. Release parking brake by depressing
clutch/brake pedal.

Publicidad

loading