UHPPOTE HBK-A01 Manual Del Usuario página 7

Set super
3
open code
Set open
4
mode
Set open
5
time
6 1 XX #
Set Multi-cards to open
0 #
7 1
Set anti-tamper alarm
1 #
Super Open Code
Repeat Super Open Code
0000 #
0 #
1 #
2 #
3 #
XX #
Advanced Application
Alar m Setting
Support one set super open code
#
which can be used to open the door
#
in any open mode.
Delete the super open code
Entry is by either Card or PIN
(Default)
Entry is by Card and PIN together
Entry is by PIN only
Entry is by Card only
XX is any number from 0 to 99.
The factory default setting is 3
seconds.
XX is any number from 1 to 10.
The factory default setting is 1.
The door will opened when the quantity of
valid cards read.
Only for Card Only mode.
OFF (Default)
ON
6
EN