Descargar Imprimir esta página

UHPPOTE HBK-A01 Manual Del Usuario página 8

Publicidad

Idiomas disponibles

Idiomas disponibles

0
#
Set keypad
8
1
output mode
1
#
0
#
Set buzzer
9
1
1
#
Remark : All code can be 4 to 8 digits long except every as zero.
The following operations must be done
Set the code of
an added card
Reset to the
default admin
code
Reset to default
setting
System Setting
Set to Normal Mode.
The door will locked automatically after an unlock
operation.
Set to Toggle Mode.
The door will keep unlocking until next unlock
operation.
Optional Setting
ON (Default)
OFF
out of programming mode
# #
Read an Added Card
1. Disconnect the power.
2 Press
.
within 5 seconds
00 #
after the HBK-A01 is powered on.
1. Disconnect the power.
2. Press
within 5 seconds
99 #
after the HBK-A01 is powered on.
PIN
#
Repeat PIN
Resets the admin code to
123456.
Resets the device to the
factory default settings.
7
EN
#

Publicidad

loading

Productos relacionados para UHPPOTE HBK-A01