Publicidad
Idiomas disponibles
Idiomas disponibles
If the power fails during use, immediately turn off the product and unplug the power cord.
•
Do not pull on the cord to unplug the product.
•
Do not move the product by pulling the cord or twist the cord.
•
Be careful not to trip over the cable and make sure the cable is not kinked, twisted, or stuck.
•
Do not place the cable on hot surfaces or near oil. Do not leave the cable hanging over the
•
edge of a table or countertop.
3. INSTRUCTIONS FOR USE
3.1 Before first use
Before using the product, mount the legs using the 4 screws provided:
1.
Turn the product or lay it on its side so you can easily reach the bottom.
2.
Place the leg in the right place on the bottom of the product.
3.
Secure the leg with 2 screws.
4.
Repeat steps 2 and 3 for the other leg.
3.2 Operation
Caution: the product gets hot!
Do not touch the hot surfaces.
Do not use an extension cord.
1.
Place the product on a stable, level surface at least 1 meter away from furniture, curtains
and other combustible materials.
2.
Plug in the power cord.
3.
Turn the thermostat knob clockwise to the desired setting to turn on the heating elements.
The switches light up when the heating elements are turned on. For maximum temperature,
turn the thermostat knob to MAX and turn both switches on.
18
Publicidad
