Craftsman 71.74290 Manual Del Operador página 4

SAVE THESE INSTRUCTIONS
e_ = A •
CONNECTING TOOL ATTACHMENT
TO THE POWER HANDLE
Be sure to follow the following safety
precautions when attaching and
detaching tools from the power handle.
Remove the battery from the handle
before attaching or detaching tools.
Never touch the control switches on
the power handle when attaching and
detaching tools.
Please refer to the instruction manual
for the Power Handle for proper
operation of the Power Handle, battery
and charger.
To attach a tool:
1. Twist the lock ring on the power
handle to the unlocked position. (see
figure 1)
Figure 2
3. Grasp the tool attachment firmly
with one hand (note, do not grasp on
a rotating part such as the auxiliary
handle), and twist the lock ring on the
power handle to the locked position
with the other hand. (see figure 3)
Figure 1
2. Insert the male end of the power
handle interface into the female socket
in the end of the tool attachment
making sure that it is firmly seated.
(see figure 2) The interface is keyed
so that it will only go together one
way. The handle and tool should go
together easily. If you experience
resistance in putting them together,
check that the keys on the handle are
properly aligned with the slots in the
tool.
Figure 3
To detach a tool:
1. Grasp the tool attachment firmly
with one hand (note, do not grasp on
a rotating part such as the auxiliary
handle), and twist the lock ring on the
power handle to the unlocked position
with the other hand. (see figure 4)