Windgoo B20 Manual Del Usuario página 5

Folding
Product accessories
Function Introduction:
1. Charging: connect the charger to charge, with AC plug first and DC plug next. When
the power bar on bike handle shows full and the charger indicator turns green from red, it
indicates full power.
2. Switch on /off: Press and hold the button on the left handle for 3 seconds to switch on.
The dash board lights up after booting. Short press for 1 second to switch off. The dash
board light will be off after turning off the power.
3. After booting, the dash board lights up and indicate the amount of electricity,
4. Front light and rear light: press the button on the right handle 3 seconds then release,
turn up the lights. Press the button on the right handle 1 seconds to turn off the light.
5. Brake light: Back light lights up when braking. It could not accelerate before the brake is
fully loosened.
6. With throttle： Please speed up slowly, don't force the rotating bar hard or it will be
broken.
Without throttlt: Riding activates electric pedal assist mode. Riding speed gears can be
adjusted via APP.
7. The bike has electric pedal assist mode.
Riding activates electric pedal assist mode. Riding speed gears can be adjusted via APP.
Without power, the bike will work with pedal at chains driving mode.
05