Descargar Imprimir esta página

Lumme LU-1331 Manual De Instrucciones página 8

Ocultar thumbs Ver también para LU-1331:

Publicidad

Do not use abrasive cleaners to clean it.
Do not put anything on bathroom scales when not in use.
Do not disassemble the scales; take it to a service center for examination, repair or mechanical adjustment.
Keep the scales in a dry place.
Do not overload the scales.
Do not shock the scales with sudden loading or striking.
If you have a metal implant an accurate reading will not be obtained.
BEFORE FIRST USE
• Please unpack your appliance. Remove all packing materials
• Wipe the surface with a damp cloth and detergent
USING THE DEVICE
Note: If you do not want to set a personal number and wish to use the scales in the normal mode simply step onto the scales.
Turn on the scales by pressing the set button, the user number will flash on the display screen. Choose a number between
Press key
to increase or
to decrease the number. Once the number has been chosen press button SET
Note: If the set button is not pressed within 3 seconds the system will automatically use the number currently flashing on screen.
Once the identification number has been chosen, set the gender sign will flash. Choose the gender buy pressing the
not pressed within 20 seconds this function will turn off.
Age will flash: to increase or decrease the age use the
If the set button is not pressed within 20 seconds this function will turn off.
Height will flash: to increase or decrease the height press the
turn off.
Once all the data has been entered the screen will flash ‗'0.0''. Step on the scales.
Display Symbols and Use:
Fat: Shown on the display as % (indication in percent)
Water: Shown on the display as % (indication in percent).
Cm: User sizes ranging from 75 to 225 cm can be saved.
%: Percent sign appears on the display when body fat or body water is displayed.
Symbol for female user.
Symbol for male user.
Kg: Weight unit (kilograms).
Age: Appears on the display screen when the users age is displayed or should be entered.
St: Weight in stones.
or
keys, once done press the SET button.
or
keys, once done press the SET button. If the SET button is not pressed within 20 seconds this function will
8
and set an individual profile.
Р00 to Р11
key then press the set button to confirm. If the set button is

Publicidad

loading