Publicidad
Idiomas disponibles
Idiomas disponibles
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder with a fitting screwdriver from the housing (anti-clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Beam angle:
Dimensions:
Weight:
Number of LEDs:
Maximum ambient temperature T
Maximum housing temperature T
Min.distance from flammable surfaces:
Min.distance to lighted object:
Fuse:
Accessory:
Stand for Pinspot, black
EUROLITE DMX LED Operator 1
EUROLITE DMX LED Operator 4
Please note: Every information is subject to change without prior notice. 14.10.2009 ©
230 V AC, 50 Hz ~
8 W
approx. 25-30°
185 x 115 x 115 mm
1.2 kg
55
:
45° C
a
(steady state):
60° C
B
0.1 m
0.1 m
F 0.5 A, 250 V
No. 50800440
No. 70064501
No. 70064504
21/40
00024228.DOC, Version 1.2
Publicidad
