Publicidad
Idiomas disponibles
Idiomas disponibles
will no longer deal with any damage to the appliance and/or your
environment under the warranty.
INSTALLATION
Take out the appliance and accessories from the packing box, check the
accessories and whether the appliance enclosure is well-found or not.
Loose the locks and take the head part from the container.
Attach the filter to the bottom of head part.
Put the lid on the container and use the locks to fixate.
Insert the aluminium pipe into the hose. Insert the other end of hose into
air inlet connection.
NOTE:
always make sure the ash vacuum cleaner filter is properly installed. As
otherwise your home dust vacuum cleaner might be damaged.
BLOWING FUNCTION:
Put hose end into the blower outlet connection. The air will now blow through
the nozzle.
NOTE:
Take care when using blower function. Ashes and other residue can be
blown away.
USAGE:
Vacuum cool ash and dry residue only.
Always make sure the filter is installed.
Only use the fire prevention filter.
When the container is full or it feels difficult to vacuum more dust, the filter
needs to be taken out and cleaned.
While vacuum the fireplace ash, the ash temperature must be below 40°C.
Do not vacuum the ashes that fire is not extinguished!
STORAGE:
Press the switch to turn off vacuum cleaner.
Pull out plug.
Roll up the power cable.
Disassemble the hose from the appliance.
Publicidad
