Publicidad
Idiomas disponibles
Idiomas disponibles
VLP 18
Spare parts and accessories
Exploded drawings and spare-part lists can
be found on our homepage:
www.flex-tools.com
Disposal information
WARNING!
End-of-life power tools must be rendered
inoperable before disposal.
For mains-operated power tools,
–
remove the mains cable.
For battery-operated power tools,
–
remove the battery.
EU countries only
Do not dispose of electric power tools
in the household waste!
In accordance with European directive
2012/19/EC on Waste Electrical and
Electronic Equipment and its incorporation
into national law, end-of-life power tools
must be collected separately and recycled
in an environmentally-friendly manner.
Recycling raw materials instead of
waste disposal.
The device, accessories and packaging
should be recycled in an environmentally-
friendly manner. Plastic parts are identified
for recycling according to material type.
WARNING!
Do not throw batteries into the household
waste, fire or water. Do not open end-of-life
batteries.
EU countries only: In accordance with
directive 2006/66/EC, defective or used
batteries must be recycled.
NOTE
Please ask your dealer about disposal
options.
Declaration of Conformity
We hereby declare that the product described
under Technical data complies with the
following standards or normative documents:
EN 60335 according to the provisions of
directives 2014/30/EU, 2006/42/EC,
2011/65/EU.
Responsible for technical documents:
FLEX-Elektrowerkzeuge GmbH, R & D
Bahnhofstrasse 15, D-71711 Steinheim/Murr
Peter Lameli
Technical Head
21.08.2023
FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15, D-71711 Steinheim/Murr
Declaration of Conformity
We as the manufacturer: FLEX
Elektrowerkzeuge GmbH,
Business address: Bahnhofstr. 15,
71711 Steinheim, Germany
declare under our sole responsibility, that
the product(s) described under „Technical
specifications" fulfills all the relevant provi-
sions of The Supply of Machinery (Safety)
Regulations S.I. 2008/1597 and also fulfills
all the relevant provisions of the following
UK Regulations:
Electromagnetic Compatibility Regulations
S.I. 2016/1091, The Restriction of the Use
of Certain Hazardous Substances in Electri-
cal and Electronic Equipment Regulations
S.I. 2012/3032 and are manufactured in
accordance with the following designated
Standards: BS EN 60335-1+A15:2012-05-31,
BS EN 55014-1:2017, BS EN 55014-2:2015
Place of declaration: Steinheim, Germany.
Responsible person: Peter Lameli,
Technical Director – FLEX-Elektrowerk-
zeuge GmbH
Klaus Peter Weinper
Head of Quality
Department (QD)
29
Publicidad
