Descargar Imprimir esta página

physa VICENZA WHITE Manual De Instrucciones página 5

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
8
2.4. SAFE DEVICE USE
a)
Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces the
risk of accidental activation.
b)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. Keep the device in
perfect technical condition. Before each use check
for general damage and especially check for cracked
parts or elements and for any other conditions which
may impact the safe operation of the device. If
damage is discovered, hand over the device for repair
before use.
c)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
d)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
e)
When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country
where the device will be used.
f)
Avoid situations where the device stops working
during use due to excessive loading. This may result
in overheating of the drive elements and damage to
the device.
g)
Do not move, adjust or rotate the device in the course
of work.
h)
Clean the device regularly to prevent stubborn grime
from accumulating.
i)
The device is not a toy. Cleaning and maintenance may
not be carried out by children without supervision by
an adult person.
j)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
k)
Do not overload the device.
l)
Exceeding the maximum permissible user weight can
damage the product.
m)
Do not step on the device.
n)
Regularly check that the screws on the device have
not become loose. Tighten as needed.
o)
Do not sit at the end of the chair. It may cause the
device to tip over.
p)
The weight must be distributed evenly over the seat
to prevent it from tipping over.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. RULES OF USE
The pedicure chair is intended for use during cosmetic
procedures. The product has an electric position
adjustment system. The product is beyond the scope of the
MDD93/42/EEC regulations for medical devices.
The user is responsible for any damage caused by non-
intended use.
3.1. APPLIANCE OVERVIEW
1
3
4
2
5
1.
backrest adjustment
2.
chair lifting
3.
seat adjustment
4.
left footrest adjustment
5.
right footrest adjustment
BUTTONS OPERATION
1
2
3
5
4
1.
backrest adjustment
2.
seat adjustment
3.
right footrest adjustment
4.
left footrest adjustment
5.
seat height adjustment
PILOT AND FOOT PEDAL OPERATION
1
2
1
2
3
4
3
4
5
6
5
6
7
8
7
8
10 9
10
9
11
12
1
3
5
7
9
2
4
6
8
10
1.
backrest lifting
2.
lowering the backrest
3.
chair lifting
4.
to lower the chair
5.
lifting the right footrest
6.
lowering the right footrest
7.
lifting the left footrest
8.
lowering the left footrest
9.
lifting the seat
10.
lowering the seat
11.
(on models with seat heating function)
- heating indicator
12.
(on models with the seat heating function)
- heating function
ADJUSTMENT RANGE
PARAMETER
Adjustment range (°)
Backrest
0-75
Seat
4- 15
Foorest
0-75
APPLIANCE LOCATION
The temperature of environment must not be higher than
40°C and the relative humidity should be less than 85%.
Ensure good ventilation in the room in which the device
is being used. There should be at least 10 cm distance
between each side of the device and the wall or other
objects. The device should always be used when positioned
on an even, stable, clean, fireproof and dry surface, and
be out of the reach of children and persons with limited
mental and sensory functions. Position the device such that
you always have access to the power plug. The power cord
connected to the appliance must be properly grounded
and correspond to the technical details on the product
label.
ASSEMBLING THE APPLIANCE
1.
Unpack the package and check that all components
are present and not damaged.
2.
In order for the chair to be mounted firmly, it should
be screwed to the floor.
3.
If the chair stands on uneven ground, adjust the legs
attached to the base of the device.
4.
Connect the plug to the power supply.
3.2. DEVICE USE
1.
Before use, make sure the chair plug is properly
connected to the power source.
2.
The height and arrangement of the device is
controlled by a remote control or a foot pedal. To
start a given function, press and hold the button on
the remote control or pedal. Releasing the button or
pedal will hold the device in the set position.
3.
The time of continuous operation of the device
should be 6 minutes/h. In the case of the Latina
White model, the working time should be 2 minutes,
and a break of at least 18 minutes.
4.
When you have finished work, disconnect the plug
from the socket.
3.3. CLEANING AND MAINTENANCE
a)
Unplug the mains plug and allow the device to cool
completely before each cleaning, adjustment or
replacement of accessories, or if the device is not
being used.
b)
Use only non-corrosive cleaners to clean the surface.
c)
Store the unit in a dry, cool place, free from moisture
and direct exposure to sunlight.
d)
Do not spray the device with a water jet or submerge
it in water.
e)
The device must be regularly inspected to check its
technical efficiency and spot any damage.
f)
Use a soft, damp cloth for cleaning.
g)
Do not use sharp and/or metal objects for cleaning
(e.g. a wire brush or a metal spatula) because they
may damage the surface material of the appliance.
h)
Do not clean the device with an acidic substance,
agents of medical purposes, thinners, fuel, oils or
other chemical substances because it may damage
the device.
i)
If the covering material is significantly damaged, it is
recommended to replace it with new one.
j)
Once a year, lubricate the moving parts of the device
that are used to adjust the position.
9

Publicidad

loading