Efapel 21236 Manual Del Usuario página 34

ON/OFF
Press .
Note: When switched off, Antifreeze or Thermal Protection are automatically activated
(see 2.6).
When switched off, also Valve Protection starts automatically (see 2.9), if activated.
INCREASE/DECREASE DESIRED TEMPERATURE
Press or
Press + or - to set temperature. Press OK to confirm.
SET TIMER
Press TIMER button for 3 seconds.
Press or
OK to confirm and exit.
Note: When the timer is active,
When time is up, Antifreeze or Overheating Protection is automatically Enabled (see 2.6) and
Valve Protection (if enabled) is automatically Enabled (see 2.9).
ENABLE/DISABLE BUTTON LOCK
Press and
Note: When buttons are locked,
MENU
Hold the MENU button for 3 seconds.
Press to navigate through the menu (Preferences, Advanced Settings, Information).
Press OK to confirm or
34
until you reach the temperature-change tab.
keys to select the desired timer value (15 minutes to 6 hours). Press
button for 3 seconds.
to exit.
will appear on the display, as well as the time remaining.
will appear on the display.