Corsair AF120 SLIM Manual página 2

REQUIRED HARDWARE
A PHILLIPS-HEAD SCREWDRIVER (sold separately)
B SHORT FAN MOUNTING SCREWS
C LONG FAN MOUNTING SCREWS (used when installing fans on a radiator)
FAN INSTALLATION
1 TURN OFF COMPUTER
Turn your system off prior to installing your
AF120 SLIM fan.
2 MOUNT AF120 SLIM
Mount the AF120 SLIM inside your case with the
provided short mounting screws (B). Fan mount
locations will vary depending on the
case manufacturer.
ADDITIONAL SET UP
Please visit our CORSAIR LAB for additional setup and configuration.
TOP
SIDE
ENGLISH
A
3 MOUNT AF120 SLIM
Please use the long screws (C) if you're mounting
the AF120 SLIM on an AIO radiator.
4 CONNECT AF120 SLIM
Connect the 4-pin PWM connector into an available
3-pin* or 4-pin (recommended, if available) fan
header on your motherboard or fan controller.
Connecting the 4-pin PWM connector into a 3-pin
fan header will cause your AF120 SLIM to spin at
full speed.
1
B C