Motocaddy BALI005M08 Manual De Instrucciones página 6

Charging your Lithium Battery
Charging your 12V Lithium Battery
1. Plug the Motocaddy 12V Lithium battery charger into an earthed mains power socket
2. The charger will display a red LED to indicate that it is ready to charge
3. Attach the battery cable to the charger matching the black and blue connectors
4. During the charging cycle, four green LEDs will illuminate in sequence until the battery is fully charged:
1 LED = 20%
5. Once fully-charged, all four green LEDs will illuminate without flashing
6. The charging process will take between 3 to 5 hours depending on the depth of discharge. This may take longer for the first few charges
7. Once charging is complete, disconnect the charger from the mains power supply and battery
Charging your 28V or 14V
The Lithium battery can be left on the trolley or removed for charging. It is possible to charge the battery while the trolley is folded or unfolded.
Always unplug the battery prior to folding the trolley or charging the battery.
1. Plug the Motocaddy 28V or 14V Lithium battery charger into an earthed mains power socket
2. The charger light will be GREEN when not attached to a battery to indicate that it is ready to charge
3. Attach the battery cable to the charger matching the black and grey connections or black and white
4. The charger light will provide an indication of charging phase:
RED - Battery charging
5. The charging process will take between 3 to 5 hours depending on the depth of discharge. This may take longer for the first few charges
6. Once charging is complete, disconnect the charger from the mains power supply and battery
If you connect the battery to the charger and the light goes out, this is likely to indicate that the battery is fully charged.
Please double check the battery on the trolley to ensure that it is fully working.
Page 6
2 LEDs = 50%
Lithium Battery
3 LEDs = 80% 4 LEDs = 100%
GREEN - Battery fully charged and ready to be disconnected