product specifications
Type:
FHT1000 Forehead thermometer
Measuring range:
93.2 °F – 108 °F (34 °C – 42.2 °C)
Resolution:
0.1 °F or °C
Accuracy (Laboratory)
0.4 °F, 96.8 ~ 102.2 °F
(Ambient Temperature: 60.8 °F to 104 °F)
Display:
Liquid Crystal Display, 4 digits plus special icons
Acoustic:
Audio:
Single long beep for 2 sec duration
Operating temperature:
60.8 °F – 104 °F (16 °C – 40 °C)
Automatic Switch-off:
Approx. 20 seconds after last measurement has
been taken
Weight:
3.51oz. (with batteries), 2.72oz. (w/o batteries)
Long term storage ranges
Storage/transport temperature:
–13 °F to 131 °F (–25 °C to 55 °C)
Humidity:
15–95% non condensing
Battery:
(2) AAA Batteries - at least 1000 measurements
Pressure:
1 atm or kPa
See instruction of use
Type BF Equipment
This infrared thermometer meets requirements established in ASTM Standard E 1965-98 (for the
thermometer system). Full responsibility for the conformance of the product to the standard is assumed
by Kaz USA, Inc., 250 Turnpike Rd., Southborough, MA 01772, USA.
ASTM laboratory accuracy requirements for the thermometer only in the display range of 96.8 °F to
102.2 °F (36 °C to 39 °C) for infrared thermometers is ± 0.4 °F (± 0.2 °C), whereas for mercury-in-glass
and electronic thermometers, the requirement per ASTM Standards E 667-86 and E 1112-86 is ± 0.2
°F ( ± 0.1 °C).
This device conforms to the following standards:
IEC 60601-1 3rd Edition «Medical electrical equipment» –
Part 1: General requirements for basic safety and essential performance
DIN EN 12470-5: 2003 «Clinical thermometers» –
IEC 60601-1-2: General requirements for basic safety and essential performance –
Collateral Standard: Electromagnetic compatibility –
Requirement and tests
NOTE: Do not use this device in the presence of electromagnetic or other interference outside the
normal range specified in IEC 60601-1-2.
Internally Powered Equipment
Continuous Operation
Not Protected against Ingress of Water
MEDICAL ELECTRICAL EQUIPMENT needs special precautions regarding EMC.
For detailed description of EMC requirements please contact Consumer Relations.
Portable and mobile RF communications equipment can affect MEDICAL ELECTRICAL EQUIPMENT.
12
1
2
3
Tapa protectora del escaner
1
2
Escáner
3
Tapa de la batería
4
Pantalla LCD
Botón de temperatura
5
6
Botón de encendido
4
5
6
13