Package Content List - stayer GAS CUTTER 33 Manual De Instrucciones

This manual is consistent with the date of manufacture of
your machine, you will find information on the technical
data of the machine acquired manual check for updates
of our machines on the website: www.grupostayer.com
1 Application ..........................................................
2 Description (fig. a) ...............................................

3 Package content list ............................................

4 Symbols ...............................................................
5 General safety instructions ................................
5.1 Working area..........................................................
5.2 Personal safety.......................................................
6 Petrol safety warning ..........................................
7 Specific safety warnings ....................................
8 Assembly ..............................................................
8.1 Bike handle installation (Fig. 1) .............................
8.2 Installation of the toolbar.........................................
8.3 Installation protection guard (Fig. 2).......................
8.4 Installing the harness (Fig. 3).................................
8.5 Replace the metal blade to spool...........................
8.5.1 Disassembly metal blade...................................
8.5.2 Assembly spool (Fig. 4)......................................
9 Fuel and lubrication ............................................
9.1 Fuel.........................................................................
9.2 Mixing fuel...............................................................
9.2.1 Recommended fuels...........................................
10 Operating instructions ......................................
10.1 Harness ...............................................................
10.2 Starting a cold engine ..........................................
10.3 Starting a warm engine (engine has been
stopped for no more than 15-20 minutes) ...........
10.4 To stop the engine................................................
10.5 Trimming procedures............................................
10.5.1 Trimming / mowing (Fig.5)...........................
10.5.2 Closer trimming............................................
10.5.3 Fence / foundation trimming........................
10.5.4 Trimming around trees.................................
10.5.5 Scalping (Fig. 6)...........................................
10.5.6 Do not sweep with trimmer...........................
10.6 Cutting with blades................................................
11 Maintenance ......................................................
11.1 Air filter .................................................................
11.2 Fuel cap / fuel filter ...............................................
11.3 Carburettor adjustment .........................................
12 Technical data ....................................................
13 Noise ...................................................................
14 Storage ..............................................................
15 Removing a unit from storage..........................
16 Trouble shooting ...............................................
17 Warranty .............................................................
18 Enviroment .........................................................
19 Declaration of conformity .................................
1 APPLICATION
Depending on the assembled cutting tools, the bush cutter
can be used to mow lawns or meadows, and to trim scrub,
shrubs, bushes and very small trees. It is for private use.
The device cannot be used for other purposes.
WARNING! Read this manual and general
safety instructions carefully before using the
appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
ENGLISH
21
2 OVERVIEW COMPONENTS (FIG A)
1. Sheet or cutting line.
2.Drive shaft assembly
3. Throttle trigger
4. Ignition switch
5. Safety switch
6. 'Bike' handle
7. Harness attachment
8. Air filter cover
9. Knob fuel tank
10. Fuel tank
11. Primer bulb
12. Choke
13. Protection guard
14. Spool
15. Trigger lock
16. Connecting rod
17. Professional harness
18. Shoulder strap
3 PACKAGE CONTENT LIST
- Remove all packing materials
- Remove remaining packaging and transit supports (if
existing)
- Check the completeness of the packing content
- Check the appliance, the power cord, the power plug
and all accessories for transportation damages.
- Keep the packaging materials as far as possible till the
end of the warranty period. Dispose it into your local
waste disposal system afterwards.
WARNING Packing materials are no toys!
Children must not play with plastic bags!
Danger of suffocation!
1 x Brush cutter / 1 x Harness / 1 x Cutting disc
1 x Spool / 1 x Manual
When parts are missing or damaged, please
contact your dealer.
4 SYMBOLS
In this manual and/or on the machine the following
symbols are used:
Read the manual before using the machine.
Denotes risk of personal injury or damage to the
tool.
In accordance with essential applicable safety
standards of European directives.
Keep a minimum distance of 15m between the
machine and third parties during use.
Watch out for particles generated by the cutting
installation.
21