Publicidad
Idiomas disponibles
Idiomas disponibles
3. Power supply
Mains supply or internal battery powered
Battery: LFP, rechargeable, 12 V - 6000 mAh.
Mains: 100 - 240 V~.
Auxiliary supply: 12 V.
3.1. Battery condition
The charge condition of the battery can be verified before or during the
resistance measurement. In order to achieve that, the operator has to
press the battery
shows remaining charge as a percentile value.
3.2. Battery charger
Charging procedure:
Check that the On/Off
Connect the equipment to the mains supply.
The battery charge indicator (
lightning with a red light up to completing the charge. At that point, it
will change to a green light, being like this up to the equipment
disconnection from the mains supply.
If during the charging of the battery the device was switched on, by
activating the key
the equipment is turned off, the charge will restart automatically.
key while the equipment is turned on. The bargraph
switch is in Off.
, the charge will be temporarily interrupted. When
9
) will keep on
Publicidad
