Publicidad
Idiomas disponibles
Idiomas disponibles
• The picture quality may degrade when two devices
are connected to the TV at the same time. In such
a case, disconnect one of the devices.
No picture
• This means your TV is not receiving any transmission.
Make sure the correct source has been selected.
• Is the antenna connected properly?
• Is the antenna cable damaged?
• Are suitable plugs used to connect the antenna?
• If you are in doubt, consult your dealer.
No sound
• Check if the TV is muted. Press the Mute button or
increase the volume to check.
• Sound may be coming from only one speaker.
Check the balance settings from Sound menu.
Remote control - no operation
• The batteries may be exhausted. Replace the
batteries.
Input sources - can not be selected
• If you cannot select an input source, it is possible
that no device is connected. If not;
• Check the AV cables and connections if you are
trying to switch to the input source dedicated to the
connected device.
All manuals and user guides at all-guides.com
Specifications
TV Broadcasting
Receiving Channels
Digital Reception
Number of Preset
Channels
Channel Indicator
RF Aerial Input
Operating Voltage
Audio
Audio Output Power
(WRMS.) (10% THD)
Power Consumption
(W)
Weight (kg)
TV Dimensions DxLxH
(with foot) (mm)
TV Dimensions DxLxH
(without foot) (mm)
Display
Operation temperature
and operation humidity:
English - 8 -
PAL BG/DK/II'
SECAM BG/DK/LL'
VHF (BAND I/III) - UHF (BAND
U) - HYPERBAND
Fully integrated digital
terrestrial-cable TV(DVB-
T-C)
(DVB-T2 compliant)
1000
On Screen Display
75 Ohm (unbalanced)
220-240V AC, 50Hz.
German+Nicam Stereo
2x6W
65W
5.7kg
185 x 735 x 476
77/97 x 735 x 438
32" (80 cm)
0ºC up to 40ºC, 85% humidity
max
Publicidad
