Simplicity Scout Plus Manual Del Propietário página 13

SYNCHRONIZING THE WIRELESS CONTROL HANDLE
IMPORTANT! If the cleaner is unresponsive after placing
the cleaner into standby mode and switching on the
cleaner via the Control Handle, please follow the below
steps to synchronize the handle to the vacuum.
• Press the Standby On/Off Button. The
cleaner will be in standby mode. (Fig
16)
• Simultaneously press and hold for
20 seconds the Power Decrease and
Power Increase buttons on the Digital
Power Control panel. If preformed
correctly, the icons on the Digital
Power Control panel will blink and
the Dust Bag Indicator light will be
switched off. (Fig 17)
• Press the "+" button on the Wireless
Control Handle to synchronize the
Wireless Control Handle to the vacuum.
If preformed correctly the Dust Bag
Indicator light will blink and the icons
lights on the Digital Power Control
panel will turn off. (Fig 18)
Note: Please ensure that the dust bag is
fully inserted into the dust bag bracket
before closing the cover to avoid dust
leaking from the dust bag.
(Fig 16)
(Fig 17)
(Fig 18)
11