Grundig VS 500 Manual De Instrucciones página 13

Your TV set receives the programmes of various stations on
certain channels.
Your recorder also "transmits" on such a channel (between
channels 30 and 40 in the UHF band) to which your TV set
must be tuned.
@ Switch on TV set and select the AV position on the TV set,
which is intended for playback of video recordings via the
aerial cable.
@ insert a prerecorded VHS cassette with the label upper-
most into the cassette compartment until it is automatically
pulled in.
@ Press button » on the recorder.
@ Tune the TV set to the picture from the recorder (between
channels 30 and 40 in the UHF band) and enter the tun-
ing position in the memory (see operating instructions for
TV set).
Alf there is a TV station transmitting on the selected output
channel of the recorder, you will get "moiré patterning" or
"wavy lines".
In this case, the output channel of the recorder must be
varied.
Recorder
® Slightly rotate the channel selector + w__w — (on the back
of the recorder) to the left or right.
@ Again search and store the recorder picture on the TV set.
@ Press button &) CASS 4 to switch off the picture of the re-
corder.
Inserting
cassette
AULY
1. Tape rewind
2. » and 4 -picture search, reverse
Playback
1. Tape forward wind
2. » and >» -picture search, forward
Multiple indications
(clock time, date, etc.)
«grim. ret. CHC
Pm Bo 5, 0-000 BBO
> e
1. Still picture on playback
2. Freeze-frame advance
3. Pause during recording
Programme selection
-- downwards --
Programme selection
-- upwards --
1. Recording
(select programme beforehand)
2. Entering STOP time
(30-minute steps)
1. Stop
2. Cassette ejection
13