SOMFY 1870359 Manual De Instrucciones página 13

Radio receiver
Installation for boiler or heat pump with hot
water tank.
S-plan :
Connect the blue and the brown cable to your HW ON
and CH ON. Connect the other end of the cable to your
heating system on the COM, and the other end to the O
on your valve.
Then take the second cable, and connect the brown wire
to L (live), and the blue wire to N (neutral). Connect the
other end of the cable to your heating system, on the L or
P terminal blocks for brown, and N for blue. Make sure to
leave the receptor's switch on the AC OFF position.
Installation for boiler or heat pump with hot
water tank.
C-plan : Connect the blue and the brown cable
to your HW ON and CH ON.
Connect the other end of the cable to your heating
system on the COM, and the other end to the W on your
valve and wire your pump also on the CH ON terminal
block of the receiver. Then take the second cable, and
connect the brown wire to L (live), and the blue wire to
N (neutral). Connect the other end of the cable to your
heating system, on the L or P terminal blocks for brown,
and N for blue. Make sure to leave the receptor's switch
on the AC OFF position.
Copyright 2020 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
©
EN
13