Hisense HS2100 Manual De Usuario página 10

5.4 Connect Power
Risk of product damage!
- Ensure that the power supply voltage
corresponds to the voltage printed on the
back or the underside of the unit.
- Before connecting the AC power cord,
ensure you have completed all other
connections.
Soundbar
OPTICAL
• Connect the mains cable to the AC~ socket of
the Sound Bar and then into a mains socket.
Subwoofer
Connect the mains cable to the AC~ socket of
•
the subwoofer and then into a mains socket.
* Power cord quantity and plug very by regions.
6. Pair up with the Subwoofer
6.1 Automatic pairing
The subwoofer and soundbar will automatically
pair when both units are plugged into the mains
sockets and turned on. No cable is needed for
connecting the two units.
• Determine the status based on the wireless
Subwoofer indicator.
Status
Lamp
Fast blink Subwoofer in pairing mode
Slow blink Connection / Pairing Failed
A
Constant on Connected / Pairing successful
NOTE:
Do not press the PAIR button on the rear of
-
the subwoofer, except for manual pairing.
- If the automatic pairing fails, pair the
subwoofer with the Soundbar manually.
HDMI ARC
OPTICAL
B
6.2 Manual pairing
1. Ensure that all the cables are well connected
and the Soundbar is in Standby mode.
Press and hold the PAIR button on the rear
2.
of the subwoofer for a few seconds. The
subwoofer will enter the pairing mode and
the Pair Indicator will blink quickly.
3. Press the button on the Soundbar or on the
remote control to switch the Soundbar on.
4. Press and hold the
or on the remote control for a few seconds.
5. After the wireless connection succeeded, the
Pair Indicator will light up.
6. If the Pair indicator blinks, the wireless
connection has failed. Unplug the cable of
the subwoofer and then reconnect the main
cable after 4 minutes. Repeat step 1 ~ 4.
NOTE:
• If the wireless connection fails again, check
if there is conflict or strong interference (for
example, interference from an electronic
device) around your location. Remove these
conflicts or strong interferences and repeat
the above procedures.
• The subwoofer should be within 6m (19.7
feet) of the soundbar in an open area.
• If the Soundbar is not connected with the
subwoofer and it is in On mode, the POWER
Indicator will flash. Follow step 1 ~ 4 above
to pair the subwoofer to the Soundbar.
6.3 Use the Hisense EzPlay Function
For Hisense EzPlay, when the Soundbar connects
with a Hisense TV via HDMI ARC, the will be a
Soundbar Setting menu on the TV, and you can
control this menu via you TV remote to control
most of the Soundbar features.
10
button on the Soundbar