Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly
7
Hinge Adjustment For Door Alignment
□
If the doors preassembled to vanity base (B) require adjustment, follow the below options as needed:
□
To adjust door up or down, loosen screws (a), adjust door and retighten screws.
To adjust door left and right, turn screw (b) in or out.
□
To adjust door in and out, loosen screw (c), adjust door and retighten screw.
□
8
Adjust drawer
If you need to remove the drawer, please press the Release Levers on the mechanisms pre-attached underneath the drawer kit at both
□
ends.
□
If necessary, you can push the Adjustment Clips on the bottom mechanisms to adjust the top and bottom gaps of the drawer.
B
9
Adjustment Clip
Release Lever
Publicidad
