CASO DESIGN CB2200 Manual Del Usuario página 43

► The appliance will start only if the glass bowl is correctly positioned on motor base
housing unit and lid on the glass bowl.
5. Connect the appliance to a suitable mains supply outlet.
6. Press ON/OFF key to start the appliance, and it initializing the programme and go to
'standby' mode.
7. Select the desired programme and start the process by pressing Start/Stop key.
Warning
► Do not touch the bottom of glass bowl and glass bowl during cooking, as they get very
hot.
► If the glass bowl contains hot liquid, pour it out carefully.
► During the programme, press Start/Stop key to pause the process. When press it again
the programme continues. After completion of the programme, if no button is press for
10minutes the appliance will shut down automatically.
► To turn off the appliance in any condition, press ON/OFF key.
► At the end of the programme the LCD displays "00" and the appliance will sound an
alert (5beeps).
► Disconnect the appliance from mains supply and let it to cool down completely once
finished cooking.
15.3 AUTO Mode
15.3.1 Commissioning
1. Place the base housing on a firm, stable & flat surface.
2. Assemble the glass bowl correctly and plug in the appliance to a suitable main supply
outlet.
3. Put the diced vegetables/ingredients into the glass bowl and add water as per your
desired recipe, then replace the lid.
4. Press the ON/OFF key, the appliance initializing the program, then goes to 'standby'
mode.
Caso Mixer mit Kochfunktion CB 2200
Please note
Please note
3. Place the measuring cup into the
opening on the lid.
4. Position the glass bowl on to the
motor base housing unit by using
guided grooves and make sure glass
bowl fits properly on motor base
housing unit.
43